MK Phantom PCB Dual Layer Tenkeyless Electrical Board

2 Layer PCB 1.6mm PCB thickness Copper Thickness: 1oz Chemical Gold Technology The Phantom Tenkeyless PCB is intended for do-it-yourself kits. Mechanical Keyboards Inc cannot be held liable for damage caused by this PCB board; including, but not limited to, damage from improper installation. Use at your own risk. Detailed Instructions on Deskthority (most of the content below from bavman on geekhack.org) The Phantom PCB is a custom tenkeyless board designed by bpiphany (formally PrinsValium) to be used with the teensy 2 programmable usb controller and a mounting plate. Compatible / to be used with: 1.5x and 1.25x modifiers Center stemmed and off-center caps lock 7x Cherry spacebars ISO and ANSI layouts 5 extra keys above the arrow key cluster Costar and Cherry stabilizers 6KRO over USB In-switch LED at caps/scroll lock and Filco style LEDs Switch top removal without desoldering LED brightness control Firmware source code can be used to remap keys Other Items You'll Need: TKL Case Mounting plate 100 Diodes (1N4148) 2 LEDs 2 Resistors for LEDs 2 LED stand-offs for filco-style LEDs Cherry MX switches A Teensy 2.0 controller with header pins Stabilizers (Costar or Cherry) Tools You'll Need: Soldering iron Solder Wire cutter Optional: Desoldering tool Optional: MultiMeter